Request a Material Safety Data Sheet
or Technical Data Sheet for this product
Ceramic Fibre Mastic is used to prevent heat loss caused by detoriation of the existing lining and can be installed using a trowel, a caulking gun or a pump. It is a multi-purpose form of ceramic fibre dispersed in a sticky, cohesive binder system that adheres to most ceramic and metallic surfaces.
Typical Physical Properties:
– Maximum Service Limit ( °C) : 1200
Density (kgs/m³):
– Wet- 1050/1230
– Dry- 705/740
– Thermal Shrinkage (%) (24hrs @ 1093°C) : 2.8
Thermal Conductivity W/M ²K:
– 500°F : 0.06
– 1000°F: 0.12
– 1500°F: 0.15
Typical Chemical Analysis:
– Alumina ( Al2O3): 40-42%
– Silica (SiO2): 55-57%
– Iron Oxide (Fe2O3): trace
FEATURES
– Low thermal conductivity
– Low heat storage,
– Excellent thermal shock resistance
– Easy to install
– Resistance to gas velocity
– Excellent corrosion resistance
– Inert to most chemicals
– Impermeable to molton Aluminium / Zinc / Copper / Lead
– Contains no Asbestos
– Ready to use
TYPICAL APPLICATIONS
– To form troughs or liners for non-ferrous metal transfers
– Gaskets and seals around burner blocks
– Protection of metallic parts form heat
– Pump into voids in badly damaged back up insulation
– Gaskets and seals for chimneys and stacks
– Boiler door seals and thermal insulation
– To fill void and cracks in refractory surface
