IMS Fire Resistive Adhesive is a superior adhesive for cementing thermal insulation to all structural surfaces. This product is a quick-setting, with good specific adhesion to iron, steel, aluminum, and most thermal insulations. It can be used without mechanical fastening for marine hull insulation.
IMS Fire Resistive Adhesive is the preferred adhesive for use with rigid polyurethane insulations. It can be used as a fabricating adhesive in making fittings, as a joint sealer and adhesive in the joints of polyurethane insulation, and as an adhesive to attach insulation to equipment surfaces. Bonds of polyurethane to itself made with 81-33 are stronger than the base insulation.
IMS Fire Resistive Adhesive withstands continuous surface temperatures up to 149°C (300°F), but it has been subjected to higher temperatures for short intervals with good results. Its excellent resistance to water and high humidity makes it a good sealing compound for joints and seams of insulation on cold water piping and equipment.
IMS Fire Resistive Adhesive meets the requirements of Military Specification MIL-A-3316C/D, Class 3, Grade A.
IMS Fire Resistive Adhesive contains no asbestos, lead, mercury or mercury compounds.
Product Description
Colour: Off-White
Application Consistency: Trowel
Weight per U.S. Gallon: 12.94 lbs ( 1.55 kg/l)
Application Non-Volatile: 66% by volume ( 80% by weight)
Coverage Range: (Subject to type of surfaces and nature of material being attached.)
25 to 40 sq. ft./gal.
0.063 in. to 0.040 in. wet thickness
(0.6 to 1.0 m²/l at 1.6 to 1.0 mm wet)
Bonding Time Range: 2 to 10 minutes
Service Temperature Limites: (Temperature at coated surfaces) -59°C to 149°C
Wet Flammability: Flash Point 43°C (110°F)
Surface Burning Characteristics: 5 on ¼ in. ( 0.63 cm) inorganic reinforced cement board. The flame spread may vary at different product thicknesses and / or when applied over other surfaces.